fbpx
Shopping Cart
Free Delivery For Orders Over $75
Teralume_Industries-Complete-Guide-To-Canopy-LED-Lighting-Kit

Complete Guide To Canopy LED Lighting

X1 Camp Light Walk Through

Chances are you’ve probably heard about our X1 LED Work Lights. Available in 5700k and 3000k with a plethora of supporting accessories makes fitting and planning a breeze. Teralume Industries is the industry leader in small LED work lights in the 4wd, camping, fleet and commercial lighting sector and for good reason!

Our X1’s are specially designed with Dow Corning sealants and a specially designed ‘spyglass’ lens suitable for even the harshest Australian environments. Don’t be fooled by similar looking knock offs and imitations, we’ve tested and refined the X range to perfection. Bloody reliable and well supported, the X range of camp light and RGB rock lights are a no brainer for your 4×4, boat or motorhome!

 

X1 Camp Light Range

Start here. First, you need to decide how many lights you need to get started. Generally speaking, most will start with 4x X1 camp lights in 5700k – White and 2x X1 camping light in 3000k – Amber.

Things to note when planning out your lighting build:

  • Shadows – if you’ve ever tried to use your phone light in a dark environment, you’ll know exactly what we’re saying. We always suggest having at least 2x X1 Camp Lights in one area to reduce shadows and to overlap the light patterns. More the better but start with two in one area!

  • Wiring – Where are you terminating your X1s back to? A switching hub? The battery directly? A switch in the canopy or vehicle? It pays to plan your wiring run! It’s never been easier with our newly added plug and play wiring extensions.

  • Where To Mount? – Gain a rough idea on where you’re going to mount your X1’s. We typically suggest canopy doors, the side of your roof rack or the back of your canopy. Keep in mind, we have a range of easy to mount base accessories to get the right fit every time. Oh, and the entire range is suitable for all-weather, harsh Australian conditions!

  • 5700k White VS. 3000k Amber? – We suggest a 2:1 ratio which means 2x white to 1x amber. Amber light will reduce insect attraction and also is a nicer light to wind down after a long day!

X1 Camp Light - 5700k / White - Black Housing

Undoubtably our most popular X1 Camp Light!

Features & Benefits

  • 5700k – True white. If you’re cooking under these lights, our high CRI Osram LED’s will bring total clarity to the job at hand.
  • Black Housing – Looks like it should be there. Discrete and powerful.
  • Dow Corning sealants – Our X1’s are tried and tested. Don’t be fooled by imitations and dodgy knock offs!
  • Super Low Current Draw – Each X1 draws only 0.25 of an amp or 6x less than the typical work light.
  • No Dual Battery Needed – Due to the super low current draw, you won’t have to ever worry about running the X1’s off your start battery!
  • 5 Year Warranty – No bullsh*t warranty. If it breaks, fails or doesn’t work – We’ll replace it! (Not one warranty claim yet!)
underlight-x1-led-camp-canopy-light_8602_teralume-industries

X1 Camp Light - 3000k / Amber - Black Housing

The Perfect Companion to the 5700k X1!

Features & Benefits

  • 3000k – Amber. 3000k or warmer color tempretures naturally deter insects and bugs. Great if you’re trying to relax!
  • Black Housing – Looks like it should be there. Discrete and powerful.
  • Dow Corning sealants – Our X1’s are tried and tested. Don’t be fooled by imitations and dodgy knock offs!
  • Super Low Current Draw – Each X1 draws only 0.23 of an amp or 6x less than the typical work light.
  • No Dual Battery Needed – Due to the super low current draw, you won’t have to ever worry about running the X1’s off your start battery!
  • 5 Year Warranty – No bullsh*t warranty. If it breaks, fails or doesn’t work – We’ll replace it! (Not one warranty claim yet!)
underlight-x1-amber-led-camp-canopy-light_8608_teralume-industries

X1 Camp Light - 5700k / White - White Housing

A different look, same bloody good light!

Features & Benefits

  • 5700k – True white. If you’re cooking under these lights, our high CRI Osram LED’s will bring total clarity to the job at hand
  • Black Housing – Looks like it should be there. Discrete and powerful.
  • Dow Corning sealants – Our X1’s are tried and tested. Don’t be fooled by imitations and dodgy knock offs!
  • Super Low Current Draw – Each X1 draws only 0.23 of an amp or 6x less than the typical work light.
  • No Dual Battery Needed – Due to the super low current draw, you won’t have to ever worry about running the X1’s off your start battery!
  • 5 Year Warranty – No bullsh*t warranty. If it breaks, fails or doesn’t work – We’ll replace it! (Not one warranty claim yet!)
underlight-x1-white-led-camp_canopy-light_8680_teralume-industries

X1 Camp Light - 3000k / Amber - White Housing

The Perfect Companion to the 5700k X1!

Features & Benefits

  • 3000k – Amber. 3000k or warmer color tempretures naturally deter insects and bugs. Great if you’re trying to relax!
  • Black Housing – Looks like it should be there. Discrete and powerful.
  • Dow Corning sealants – Our X1’s are tried and tested. Don’t be fooled by imitations and dodgy knock offs!
  • Super Low Current Draw – Each X1 draws only 0.23 of an amp or 6x less than the typical work light.
  • No Dual Battery Needed – Due to the super low current draw, you won’t have to ever worry about running the X1’s off your start battery!
  • 5 Year Warranty – No bullsh*t warranty. If it breaks, fails or doesn’t work – We’ll replace it! (Not one warranty claim yet!)
underlight-x1-white-led-camp_canopy-light_8680_teralume-industries

X1 Base Accessories

To further add convenience and true DIY installation, we have a range of mounting base accessories to fit not only the X1 range but also the X-RGB range too! Our bases allow you to fully plan out your lighting setup with either the 30 degree angled base and the brand new notched base for tube mounted applications – exclusive to Teralume Industries!

underlight-x-rgb-base-options_8724_teralume-industries

X1 Inclusion - Flat Base

Every X1 has a flat rubber base included. Although you don’t require the flat base to fit and install the X1’s, there are a number of benefits to using the flat base.

  • The base has rear webbings to allow wiring to be routed behind it. This comes in handy if you don’t have enough room to route your wiring between the surface you are attaching it to (ie. A canopy door or rear of your canopy/roof rack).
  • Reduces friction and scuffing between mating surfaces.
  • Our entire range of bases are fully suitable for outdoor use – UV stabilized rubber.
underlight-x1-led-camp-canopy-light_8602_teralume-industries

X1 Accessory - 30 Degree Angled Base

Almost everyone who purchases X1’s will also add some angle bases too. The 30-degree base allows for a more individual fit, angling them to best suit your application.

  • The angled base also has rear webbings to allow wiring to be routed behind it. This comes in handy if you wish to bring your wiring out a certain way or direction. A simple incision with a knife will have you routing your wiring exactly how you want it.
  • Allows for a perfect fit, every time. The angled base will bring your lighting setup to new levels of lighting convenience.
  • Our entire range of bases are fully suitable for outdoor use – UV stabilized rubber.
underlight-x-series-30-degree-angle-base_8555_teralume-industries

X1 Accessory - Notched Tube Base - Suit 2.25 inch - 2.75 Inch Tube

A brand new exclusive to Teralume Industries, the notched base for tube mounted applications. For those who want to add some lighting to a roll bar, bull bar or Bimini on a boat, here’s your answer!

  • Our brand-new notched base for tubes allows fitment to 2.25-inch to 2.75-inch tube. You have the option to cable tie or screw the mount into the tube. Both cable ties and self-tapping screws are included in the base kit.
  • The X1 mounts to the base, not the tube. The independence of the base with the light mounted allow for a truly unique fit.
  • Our entire range of bases are fully suitable for outdoor use – UV stabilized rubber.
underlight-x-series-notched-base_8531_teralume-industries

X1 Wiring Accessories

Fully Terminated - Exclusive to Teralume

In true Teralume nature, we’ve done the hard work for you. Every X1 work light has a plug and tail with bare wires. This allows you to unplug the wiring tail and add in wiring extensions or switches. 

No other company offers this style of lighting system – Exclusive to Teralume Industries!

underlight-x1-wiring-cable-connection-tail_8764_teralume-industries

X1 Wiring - 1 Meter Extension Cable

Exclusive to Teralume, we have a plug and play 1-meter extension that is fully terminated and ready to run! Simply unplug the wiring tail from your X1 camp light and plug in the required extension. You can now fully plan out your wiring run without having to butcher wiring and worry about soldering or cutting.

camp-light_extension-cable_X1-EXT-1M_teralume-industries

X1 Wiring - 3 Meter Extension Cable

Exclusive to Teralume, we have a plug and play 3-meter extension that is fully terminated and ready to run! Simply unplug the wiring tail from your X1 camp light and plug in the required extension. You can now fully plan out your wiring run without having to butcher wiring and worry about soldering or cutting.

camp-light_extension-cable_X1-EXT-3M_teralume-industries

X1 Wiring - 5 Meter Extension Cable

Exclusive to Teralume, we have a plug and play 5-meter extension that is fully terminated and ready to run! Simply unplug the wiring tail from your X1 camp light and plug in the required extension. You can now fully plan out your wiring run without having to butcher wiring and worry about soldering or cutting.

camp-light_extension-cable_X1-EXT-5M_teralume-industries