All New Icon LED Driving Lights
We had a vision to build something that was not castrated by budgets and inferior materials, instead built to a standard that would last the test of time. We wanted to bring back the purity of what a LED Driving Light is and skip all the rubbish marketing in-between. We have released an LED Driving Light that’s made for the people.
1303m @ 1Lux / Pair
IP69K -Dust & Waterproof
Compact & Slim Design
5 Year Replacement Warranty
Quik-Fit Wiring Harness
The Icon emits an intense spot beam found nowhere else on the market. We have integrated the highest quality automotive components, materials and latest technology, leaving no stone unturned.
With endless options of LED Driving Lights available today, the Icon is something completely different. The design theory behind the Icon spawned from a much different conversation, one not of cost or weight reduction, rather one of performance and stout.
712 days since inception. 179 days of theoretical testing. 122 days of physical testing. 5 major iterations. The Icon was ready.
WHAT A DRIVING LIGHT SHOULD BE
The Icon represents what a driving light should be in more ways than one. The intense spot beam that the Icons project is what everyone’s been waiting for since LED technology found its way into driving lights; distance down the road.
The Icons comprise of 34 x ultra-high-output emitters, 6 x Oslon® emitters and 28 x CREE® emitters. Both emitters complement each other perfectly, boasting weapon-like output and beam length. Each emitter has been specifically tuned to the reflector, unlike any other LED Driving Light on offer.
The hybrid of Oslon® and CREE® ultra-high intensity emitters and sophisticated reflector design redefine the LED Driving Light space, projecting a clear and even beam of light over 1300m ahead. For the first time, you can now experience what a true LED Driving Light should be.
EFFECTIVE & EFFICIENT
The Icon crushes the theory that LED Driving Lights are not suggested for long-distance projection.
To harness the full potential of each LED emitter we engaged highly sophisticated design software and light simulation methods to design our reflector housing. The results are proven, enormous long-range projection with total consistency and clarity. The reflector housing utilises an ultra-reflective vacuum-metallised coating to further enhance the already astonishing performance.
The 3.6-degree parabolic spot beam significantly reduces unwanted light bleed and reflection, maximising each emitters output. The tight and focused beam offers greater confidence in poor conditions as it minimises unwanted feedback from reflective airborne particles.
CONSTRUCTION AND DESIGN
We haven’t met one person that treats their driving lights with respect. We’re talking about a product that sits on the front of the vehicle, literally copping everything that gets thrown at it. We had to ensure that the Icons would last, year after year.
The Icons have over 700 grams more aluminium in the cast housing to allow for faster and more effective thermal stabilisation. More response in thermal stabilisation means the Icons can run more effectively in demanding situations.
We sourced and developed the very best materials right down to the rubbers and sealants used. An oversized cast housing keeps the units cool whilst the class-leading 5mm bracket keeps the unit stable. Every aspect of the Icon has been thoroughly thought-out.
LENSES AND COVERS
Our lenses are hardened and have the same DNA as ballistic material. The nature of the lens is to be shatterproof, featuring enormous deflection properties. We’ve tested the breaking point of our lens material by shooting a small projectile at 830ft/sec straight into the lamp without lens failure. The Icon’s lens is also resistant to scratching and UV damage. Each lens has a unique UV coating applied to ensure they stay crystal clear, year after year.
We don’t make a lens cover for the Icon.
Clear covers can ruin transmission of light by over 30%. Today, almost all light lenses are of a plastic derivative which won’t shatter like older auxiliary lamps fitted with glass lenses. Lens covers tend to allow dust and dirt build-up between the lamp and the cover which is generally overlooked when cleaning.
Colour temperature is crucial. In auxiliary lighting applications, the incorrect Kelvin lighting will ruin the entire experience for the driver. Very rarely will manufacturers take the emitter’s Kelvin into consideration. Why? Because it’s cheaper and easier to mass-produce 6500-Kelvin+ emitters.
It’s documented and scientifically proven that artificial light is best found at 5500 Kelvin, due to the immense similarity of that and the colour temperature of the sun. The 5500 Kelvin emitters will offer a natural and safer driving experience at night, no matter the conditions.
- Less feedback from fog, dust and rain
- See animals, hazards and obstacles with total clarity
- 5500K will bring life to the surrounding environment
- Easier to see, less eye strain
- Immense light quality improvement
BOLT ON. PLUG IN. ENJOY.
READY TO RUN
We’ve taken to the time so you don’t have to. The Icons arrive fully assembled and ready to bolt onto your vehicle, no need to muck around trying to assemble them. Also included is our Quik-Fit plug and play wiring harness, allowing super easy installation without any cutting or soldering!
Our Quik-Fit wiring harness is a complete ‘plug and play’ solution. Automatically adapting to positive and negative switched vehicles and also CAN bus safe. Included are H4 and HB3 adaptors for the high beam feed from your OE headlight connector.
HOW DO I FIT MY ICON'S?
Watch as Jock explains how easy it is to fit the new Teralume Industries Icon’s. Your Icon’s will arrive fully assembled and ready to bolt to straight on. The wiring side of things is equally as easy, our harness comes with a H4 & HB3 high beam plug, with other plugs sold separately.
It doesn’t matter if you have a positive or negatively switched vehicle, our wiring harness will sort that out for you. All that is required is plug in and play!
Support & Instructions
We’ve designed a dedicated support portal to assist you in all your lighting ventures. We’re continuously adding new instructions, tips and guides to help you get the job done.
Design Registration: 201917015
- Pair of Teralume Industries™ Icon LED Driving Lights
- Quik-Fit Harness. Heavy Duty Complete Plug n Play Wiring Harness. Complete with H4 and HB3 Connectors to High Beam
- Bolts, washers and nuts for the base of the bracket
- Wiring and Fitting Instructions
- Teralume Industries™ Sticker
ISOlux - 1303 meters @ 1LUX / Pair
- Voltage – 9-36V DC
- Mounting – 5mm Brushed Stainless Steel Brackets – No Welds
- Warranty – 5 Year Australian Replacement Warranty
- Power – 120w / 8.6A @ 12V DC
- Vibration – Vibration dampened and shockproof to 28G
- Diodes – Combination of ultra high output Oslon® and CREE® didoes
- Lumens – 14, 616 Effective Lumens per unit
- Light Beam – 3.7-degree hyper spot beam
- Ingress – IP69K – Water Proof up to 3 meters
- Connections – Waterproof Deutsch® DT-P connector
- Wiring – Complete Plug ‘n’ Play Quik-Fit Harness + H4 & HB3 connectors
- Housing – Ultra high-pressure cast aluminium
- Weight – 3.25 Kilograms Each
- Interference – CISPR 25 Class 3
- Sold In Pairs – The Icons are sold as pairs and arrive at your home in one box, ready to run.
- Fully Assembled – The Icons arrive fully assembled and ready to run. All you need to do is mount them and plug them in!
- Less Unwanted Reflection – The Icons have a far superior beam pattern to most other driving light offerings. Less stray light is emitted from the lamp, significantly reducing unwanted reflective feedback to the driver.
- 5mm Bracket – Class-leading 5mm Stainless Steel bracket will stand up to huge punishment!
- Dust & Waterproof – IP69K. The Icon’s obtain the highest ingress certification available. 100% water and dust tight.
- Interference Free – CISPR 25 Class 3 Certified. The Icon’s won’t interfere with electronics such as your UHF/CB Radio or cellular devices.
- 5500 Kelvin – Less eye fatigue. The Icon’s allow you to see obstacles and hazards with total clarity.
- 5 Year Warranty – An Australian company with an Australian no-nonsense 5-year replacement warranty.
Slim Design – The Icons have one of the tightest profiles of any full-sized driving light on the market at only 89mm. We managed to retain the oversized cast housing, without sacrificing profile depth. The thermal stabilization properties of the Icons are second to none, stabilizing over 50% sooner than others. The Icons are well equipped to handle those who operate machines and vehicles where there may be slow to no airflow over the units. Minimal throttling from the IC drivers allows the Icon to power through every situation with ease.
Adhesives and Sealants – The Icons feature Dow Corning sealants, glues and adhesives. We must consider the ability of our seals and adhesives to stay within their manufacturer specification over time. Other inferior materials will breakdown over time and become brittle which allow impurities to permeate, destroying the lamp.
Stainless Steel Bracket – The Icons feature a 5mm Stainless Steel bracket. We’ve carefully designed the bracket to cradle the lamp with total balance. Balancing the weight of the lamp within the bracket will reducing any vibration fatigue of the bracket or hardware by 3 or more times. We have tested TIG/MIG welded brackets and also cast aluminium brackets with less than ideal results. The only option for us was to integrate a single piece 5mm bracket to ensure there were no weak spots or welds.
Breather – Firstly, don’t be fooled by “military breathers” – there is no such thing! The easiest and most common way that a lamp will fail their IP certification is through the pressure equalisation vent or breather – think of it as a diff breather on a 4wd. We use a patented breather that adheres to the IP69K certification providing long-lasting protection from the elements.
Plugs – Deutsch connectors are the only true automotive connector that protects vital electrical connections against environmental abuse. China has copied the design and failed miserably. They often don’t fit properly and are made out of inferior materials that won’t last the test of time. Not to mention, they render themselves useless against the elements, allowing dust and moisture into the electrical connection. The entire Teralume Industries product range use the original article for all electrical connections. Ensure your connections are fitted using genuine Deutsch connectors.
Circuit Board – Circuitry is usually the first thing to fail. Given circuits are not a serviceable item, a failure on will render the printed circuit board (PCB) useless. We’ve sourced the best Japanese automotive components to build the Teralume Industries range of circuits. Proper design and manufacturing of printed circuit boards will serve many purposes in the long run. Our circuits pass the CISPR 25 Class 3 electrical interference certification and will perform trouble-free, every night of the week for years to come.
Coatings – Australia falls in the top 5 for the most brutal UV index on the planet. In short, anything that’s exposed to significant sunlight in Australia will have a tough time holding up over time. Our entire range using a Du Pont powder coat material which features the best UV protection properties for the application.